Fastener News Archive

Industry source for thread insert systems

14th June 2018

Already a well recognised supplier of engineering cutting tools, Bordo International Pty Ltd is now placing a major focus on thread insert systems to further its development. Bordo Europe, a subsidiary located in Belgium, is solely focused on providing these thread insert solutions to distributors across Europe. PowerCoil®, a wire thread insert solution for the repair and strengthening of inter...

Aerospace

Jextar – a new champion in stainless steel

13th June 2018

In many critical applications fasteners need to be stainless steel, but standard A4-80 just isn’t strong enough. There are fasteners on the market to accommodate the need, but they are expensive and often not readily available. After extensive research and testing Jeveka B.V says it has succeeded in developing a screw that is up to the requirements of the market. The new Jextar is a high-qualit...

Offshore

Focus on security screws

12th June 2018

Hafren Security Fasteners is committed to stamping out the impact of theft globally and is working to achieve this through the wholesale supply of security fasteners, specialist tamper resistant screws, nuts and bolts. Any product is the sum of its parts, which is why the quality of fastener components is vital. When designers and manufacturers are considering security issues with fasteners the...

Other Industries

Hydratight secures gas turbine project

11th June 2018

Hydratight has secured a contract to provide a newly designed Multi Stud Tensioning (MST) system through a collaborative agreement with local Japanese agents, Yokohama Engineering Services. The project, which has come to fruition after six months of working closely with Mitsubishi Hitachi Power Systems (MHPS) Japan, will provide a tailored bolting solution for the new 501J series gas turbine. M...

Offshore

LISI AEROSPACE distinguished by Airbus

8th June 2018

LISI AEROSPACE recently received two ‘Best Improvement’ awards from Airbus as part of the SQIP approach – rewarding the progress of its performances. LISI AEROSPACE has been a long-standing supplier of Airbus since the beginning of the aircraft manufacturer. The first award it received was for its fasteners segment and applies to the 11 factories that coordinate its efforts to deliver more than...

Aerospace

ZaGO self-sealing fasteners take a deep dive

7th June 2018

Manufacturers of subsea products have learned that using ordinary fasteners on robotics and sophisticated machinery intended for the ocean depths is hazardous. ZaGO states its self-sealing fasteners can help protect the sophisticated technology that goes into underwater equipment. Undersea exploration is expanding rapidly as scientists investigate environmental concerns; states navigate strateg...

Offshore

Learn how to properly pin a shaft and hub assembly

6th June 2018

Published: 6th June 2018 By Christie L. Jones, market development manager at SPIROL International Corporation Ref: FFT180606  One of the primary benefits of using a coiled spring pin to affix a hub or gear to a shaft is the coiled pin’s ability to prevent hole damage. Another benefit is that the coiled pin absorbs wider hole tolerances than any other press-fit pin. This translates to lower tota...

Automotive

fischer supplies FZP anchors for 99 Hudson Street

5th June 2018

90,000 fischer FZP anchors are fixing Bavarian natural stone plates to the striking element façade of 99 Hudson Street, Jersey City, USA. The skyscraper has been under construction since 2016, and, upon completion, will tower above every other building on the west bank of the Hudson River with a height of 270m. High requirements including extreme wind loads on one of the USA’s tallest residenti...

Construction + Civil Engineering

Alternatives to screws for attaching thin panels in assemblies

4th June 2018

New stainless steel PEM® TK™TackSert® pins from PennEngineering®introduce ideal alternatives to screws for attaching thin panels in assemblies. They can securely attach panels of any material to base panels manufactured from common casting materials (such as AZ91D) or plastics (such as ABS and printed circuit boards). Unique design features promote reliable performance in service. PEM TK TackSe...

Electrical + Electronics

Rapierstar supports fast-growing trade fabricator

1st June 2018

Window and door fastener specialist Rapierstar is helping leading Scottish trade fabricator Merlin Network (Scotland) to keep production on track and to a high standard as it experiences record demand for its PVCu windows. Rapierstar has now been supplying a range of high performance fasteners to Merlin for more than two years, with increased volumes in recent months reflecting the fabricator’s...

Other Industries