Leaf springs in rocket for space research 19 November 2018

In March 2019, a sounding rocket is launched for research on the density and temperature of electrons in the lower ionosphere. The rocket's locking system includes leaf springs from Lesjöfors.

The European research programme REXUS/BEXUS gives students the opportunity to launch space experiments in a sounding rocket. Two rockets, a Swedish and a German, are annually launched and are dedicated for student projects throughout the EU and Canada. The students receive guidance from experts in the field, such as the European Space Agency (ESA), the German Aerospace Center (DLR), the Swedish space Corporation (SSC), and ZARM (Center for Applied Space Technology and Microgravity).

PRIME (Plasma Measurement with Micro Experiment) is an experiment by students at the Royal Institute of Technology in Stockholm (KTH), to be launched on REXUS25 sounding rocket in 2019. The project aims to develop a miniature recoverable Free Falling Unit (FFU) for plasma parameter measurements in the lower ionosphere. Two identical FFU's are to be ejected from the Rocket Mounted Unit. The FFU is 30mm in diameter and 250mm long. The rocket reaches an altitude of about 85 kilometers.

“Similar measurements have been made before, but this will be the first time with a smaller FFU. We have launched a test prototype of the FFU in the Netherlands in cooperation with a local engineering company and we strongly believe in a successful experiment,” says Isabelle Gürsac, one of the KTH students in PRIME.

The sounding rocket has an ejection system with a locking device. The locking system contains leaf springs from Lesjöfors with an essential function to control the ejection of the mini probes.

“We are very grateful to our sponsor partners who enable us to carry out research projects like PRIME. We are very pleased with the positive response and the generous contribution of high-quality leaf springs from Lesjöfors,” says Isabelle Gürsac.

After a hopefully successful experiment, the FFU´s can be found through the internalised localisation system. The launch will take place at Esrange in Kiruna in March 2019.

Claire Aldridge Deputy Editor t: +44 (0) 1727 743 889

Having spent a decade in the fastener industry experiencing every facet – from steel mills, fastener manufacturers, wholesalers, distributors, as well as machinery builders and plating + coating companies, Claire has developed an in-depth knowledge of all things fasteners.

Alongside visiting numerous companies, exhibitions and conferences around the world, Claire has also interviewed high profile figures – focusing on key topics impacting the sector and making sure readers stay up to date with the latest developments within the industry.