WDS gets behind landmark project 05 January 2018

WDS Component Parts Ltd has expressed its delight at the first successful public test run of Bloodhound SSC, the British built supersonic land speed record car, on which it designed and supplied the angle plates for the suspension assembly jig.

RAF Wing Commander and current land speed record holder, Andy Green, ran the Bloodhound from 0 to 200mph in eight seconds at Newquay Airport this October, providing 3,500 spectators with a 180dB taster of what the vehicle will be attempting in South Africa. WDS has been involved in the project, providing sponsorship support and bespoke angle plates for use in assembly jigs for the car's front and rear suspension.

Building on a rich British tradition of pushing the limits of what's possible on land, Bloodhound SSC expands on the legacy of Thrust SSC, the first land vehicle to successfully break the sound barrier in 1997. Bloodhound SSC aims to eclipse this record, with the Bloodhound team setting a final goal of cracking 1000mph, an astonishing 447 metres a second. The one-mile-pass attempt will be carried out on the dry Hakskeen Pan lakebed in Northern Cape during 2020.

More resembling a rocket than a traditional car, Bloodhound SSC utilises a 135,000+ horsepower (hp) Rolls Royce EJ200 jet engine and bespoke rocket set up. Manufacturing standards resemble those of the aerospace industry, with the racing car inspired carbon fibre 'monocoque' chassis and aircraft style panels designed to the most stringent tolerances. The project aims to showcase domestic manufacturing expertise, inspiring future engineers to progress in the industry.

WDS' contribution is of particular importance, as the suspension will have to withstand forces of up to 30 tonnes during the record attempt. Suspension set up is critical to the success of the run and the safety of Andy Green, as even the slightest inaccuracy could cause the Bloodhound to enter a terrifying high-speed drift – a widely noted issue with land speed record cars of the past. To overcome this, the Bloodhound team has selected a double wishbone suspension system similar to that used in Formula 1. To aid with precision, WDS designed and supplied the angle plates for the suspension assembly jig, which has ensured an optimum set up for future runs. The business was well placed to accept the challenge, as it regular supplies high performance parts to Formula 1 teams and the aerospace industry.

"The first successful public test came as great news, and its all the more satisfying as our involvement has helped to enable this landmark project. We are no strangers to supporting this kind of endeavour, we also provided components for Thrust SSC, so it's a privilege to be on the cusp of what's humanly possible once again," comments Phil Holyome, WDS sales engineer.

Will Lowry Content Director t: +44 (0) 1727 743 888

Will joined Fastener + Fixing Magazine in 2007 and over the last 12 years has experienced every facet of the fastener sector – interviewing key figures within the industry and visiting leading companies and exhibitions around the globe. Will manages the content strategy across all platforms and is the guardian for the high editorial standards that the brand is renowned.