New challenges for high performance spring in critical aerospace application 18 October 2017

William Hughes has been manufacturing precision, high specification springs for many years, and is well equipped to meet the exacting demands of the aerospace industry including its special requirements for materials, specifications, manufacturing tolerances, cleanliness and packaging.

A recent example of a spring for a safety critical aerospace non-return valve presented new challenges to the design and production team at William Hughes.

The application required a large spring which, as well as being manufactured in a specialist aerospace certified material that has a high spring index making it difficult to form, the unusual specification called for one end of the spring to be fusion welded using stainless steel filler rod.

Following the welding process, the end coils have to be cleaned to ensure that they are uniform with no protrusion, this being achieved using a series of grinding, polishing and deburring processes. The opposite end is then fettled on the inside to allow correct location on valve housing and both spring ends are chamfered and deburred. The spring is heat treated and passivated in William Hughes’ NADCAP oven process before being 100% checked for squareness and load.

Springs manufactured by William Hughes are being used in vital items of aerospace equipment including oxygen systems, access hatches and the solenoid valves used to control the hydraulic and cabin pressure systems. The company offers its customers a rapid design and prototyping service in a range of materials. This facility is particularly suited to the aerospace industry where small quantities are required for prototypes with the capability to move to volume production once a final design is agreed. Quality systems to ISO 9001:2000, ISO/TS 16949:2002 and AS9100 - the quality management system standard for aerospace companies - ensure consistency and accuracy of supply.

In addition to precision specialist springs, William Hughes can also supply bespoke bent wire forms and sub-assemblies.

Will Lowry Content Director t: +44 (0) 1727 743 888

Will joined Fastener + Fixing Magazine in 2007 and over the last 12 years has experienced every facet of the fastener sector – interviewing key figures within the industry and visiting leading companies and exhibitions around the globe. Will manages the content strategy across all platforms and is the guardian for the high editorial standards that the brand is renowned.