Making nut ready cuts 08 April 2019

Milwaukee Tool’s new tool for cutting the most common sizes of threaded rod, the M18™ brushless threaded rod cutter, delivers clean, burr-free cuts for threading nuts on by hand. It also has the power to cut through ¼ inch, ⅜ inch and ½ inch mild steel or ¼ inch and ⅜ inch stainless steel threaded rod in seconds.

The new tool features a unique design with a 1½ inch built-in trim length and one handed centre grip for making uniform, controlled overhead cuts. This also offers users the clearest line of site for the most accurate cuts. Not only is the tool optimised for overhead cutting, but it can also be laid flat on its back for prefab cutting.  

A brushless motor and an M18™ REDLITHIUM™ 2.0Ah battery allow this tool to deliver over 400 nut ready cuts per charge, reducing the need to file the threaded rod before applying the nut. The die also includes three different cutting sizes, which can be changed by rotating the dies, allowing users to cut the most common sizes of threaded rod. In addition, REDLINK™ electronics allow the tool’s jaw to auto-retract after each cut so users are ready for the next cut right away.

All these features work together to prevent burrs, chips and sparks – all common frustrations when using non‑dedicated tools to cut threaded rod. The new tool is also part of Milwaukee’s M18™ system, which now offers more than 180 power tool solutions focusing on the user.

Claire Aldridge Deputy Editor t: +44 (0) 1727 814 450

Having joined the magazine in 2012, Claire developed her knowledge of the industry through the numerous company visits, exhibitions and conferences she attended both in the UK and abroad.

Responsible for social media and the online platforms, Claire prides herself on keeping readers well informed and up to date with the latest industry news.